DAYTIME VISIBILITY
This jacket is certified for DAYTIME VISIBILITY thanks to the colour of its fabric, which meets luminance requirements, and its high proportion of neon fabric.
CYCLING-SPECIFIC CUT
The 100 jacket, with its elasticated waist, is designed to protect urban cyclists riding occasionally in rainy weather. Its cut allows it to cover your lower back, arms, neck and wrists when you're on your bike.There are vents under the arms to help air circulate.
You can wear your helmet over the hood.
You can stuff it into its back pocket to make it easy to carry
WATERPROOFING
This jacket's robust, coated material and sealed seams make it waterproof. A fabric's waterproofing is determined by measuring its resistance to the pressure exerted by a water column, measured in mm (test based on ISO 811 standard). Our material is resistant to the pressure from 2,000 mm of water. The finished product is approved in a shower test in the lab, where we recreate the conditions of an average downpour: 60 L water per square metre per hour for 2 hours.
COMPONENT BREATHABILITY
Hydrophilic coating (RET = 12): limits condensation inside the garment. To see whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more the fabric lets water vapour produced by the body escape, and the more breathable it is.
Tips for storage and maintenance
Machine wash - 30° max - normal
Do not bleach
Do not tumble dry
Do not iron
Do not dry-clean
Storage tips
Don't pack the product away when it is still wet as condensation may form, keeping the product damp. Leave your product to fully dry after use before packing it away.
Restrictions on use
Not suitable for riding in heavy rain.
TESTS AND WARRANTY
Test product
100% watertight seams, tested in the lab. This product has passed a shower test under 60 L / sqm / h during 1 hour. This test reproduces the average conditions of a light rain shower.
Warranty
2 Years
Agree by
This jacket is an item of personal protective equipment (PPE) that makes the wearer more visible.
It has been tested for compliance with CE standards by a notified body: SGS Fimko, no. 0598, Takomotie 8, 00380 Helsinki, Finland. The EC type test was performed on the basis of the requirements of standard NF EN1150 for category 2 PPE