Advice from our team:
Remove your wheels so that none of the product gets sprayed onto your brake pads.
Shake the aerosol can before spraying. Apply directly to your drive train until you achieve the desired result.
Rinse and dry with a microfibre cloth.
How to look after your bike:
To ensure optimal maintenance, we recommend that you follow these 3 steps:
1. degrease your drive train
2. clean your bike
3. lubricate your chain
How to use this product:
This aerosol degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.
Maintenance advice:
Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.
User tip:
300 ml aerosol = approx. 5 uses
Storage advice:
Keep out of reach of children.Keep away from heat, hot surfaces, sparks, naked flames and any other source of heat. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Keep out of direct sunlight. Do not expose to temperatures exceeding 50°C.
Precautions:
Avoid contact with the brake pads.
If you do accidentally get the product on these parts, rinse thoroughly and dry with a microfibre cloth.WARNING.Flammable aerosol. Pressurised container: may burst if exposed to heat.If medical advice is needed, have product container or label at hand.
Did you know?
CO2 is a much better propellant gas than the butane previously used for this product. In fact, 8 times less gas is needed for the same amount of product.
Tips for storage and maintenance
Do not wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry-clean
Storage tips
Keep out of reach of children.Keep away from heat, hot surfaces, sparks, naked flames and any other source of heat. Do not smoke.
Restrictions on use
Hazardous product. Follow directions for use.
