Technical features
3.5 mm neoprene hood.
Stretch neoprene around the neck and ears to ease movement and best adapt to all shapes.
Air Expulse system: a system to evacuate air bubbles trapped in the hood.
The area in contact with the face is made from smooth neoprene for greater comfort and to help stop water getting in.
GBS (glued and blind stitched) assembly
The seams of the hood are watertight, sewn with GBS stitching (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
Choose the right size
Measure the circumference of your head and choose the right size:
XS/S: 53- 56 cm 20.8-22.1 inch
M/L: 57-60 cm 22.4-23.6 inch
XL/XXL: 61-64 cm 24-25.2 inch
Tips to look after your diving hood
1) Soak the inside and the outside of the diving suit in clean water after each session.
2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water.
4) Dry on a wide hanger in a dark and well-ventilated place.
Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease
Tips for storage and maintenance
Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry-clean
Storage tips
Dry your diving suit out of the sun and well clear of all sources of heat. Store your diving suit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
Swimming.