Technical features
300-bar pressure gauge with stainless one-piece chrome-plated brass housing, explosion-proof, shock-proof. Copper-beryllium sensitive spiral element. Hose with an outer diameter of 55 mm. Male screw thread. 7/16'' HP. Weight: 260 grams. Highlighting of the red zone between 50 bar and 0 bar for greater clarity and safety. Extra ring on the side to attach the pressure gauge and keep it within reach thanks to the safety strap.
Tips on assembly
To not overtighten the first stage. Overtightening can damage the first stage, usually made of chrome-plated brass (a soft alloy). The O-ring on the hose is used for watertightening purposes. Use a silicone grease to lubricate the seals and increase their lifespan.
Servicing the regulators
SUBEA advises you to service your regulator every two years and to make a visual inspection at least once a year. These two inspections must be made in a SUBEA certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
Please visit our website.
Storage instructions
It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.
Tips for storage and maintenance
Storage tips
It is important to store diving equipment away from sources
that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restrictions on use
Diving requires the certification/supervision of an instructor.
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France).
Warranty
2 Years
Agree by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA diving products: from the design phase with the SUBEA team (product manager, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).