Hide filters
Filters 0
Order by:
Filters 0
26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
26" Inner Tube Twin-Pack

DECATHLON

3314575

26" Inner Tube Twin-Pack

€2.60
VAT included
68 reviews
61 of 68 people recommends this product
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
  • 26" Inner Tube Twin-Pack
26" Inner Tube Twin-Pack
Not available online

Store Availability

This twin pack of inner tubes is compatible with 26" diameter tyres, with a cross-section ranging from 1.70 to 2.20 with a 35 mm Schrader valve.

A pack of 26" inner tubes with excellent value for money. Faster and more effective than a patch.

BENEFITS

Compatibility

26-inch tyres and wheels for mountain bikes and hybrid bikes.

Waterproof

High quality valve that retains pressure.

TECHNICAL INFORMATIONS

How to choose an inner tube

Check the information indicated on the sidewall of the tyre (diameter and width).
For example, 26 x 2.20 means your tyre is 26 inches in diameter and 2.20 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-559 means a tyre that is 50mm wide and has an inner diameter of 559mm (approx. 26 x 2.00).

Removing an inner tube

Remove the used inner tube using B'Twin tyre levers (item code 8047839).

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.

Mounting the inner tube

Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start by mounting the tyre onto the wheel on the opposite side to the valve.
Finish mounting the tyre at the valve to avoid pinching the inner tube.
Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To avoid punctures from pinching, and for best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.

Weight:

202g

Videos

Reviews

4.4/5 68 reviews
61 of 68 people recommends this product
Split on seam
Richard (United Kingdom) Used for 3 to 6 months
In use for a few months, I inflated the tyre to 60psi the day before a ride. After about 10 minutes very loud hissing and the tyre had fully deflated in a few seconds. Removed the tube and it had split along a seam. The bike was indoors and stationary, The 6mm split was on the inside of the tube next to the rim. Definitely not punctured, the rim tape is fine. Annoyingly I'll now have to replace both the tube and the Slime puncture liquid.
Its lucky I wasn't riding when this happened as the deflation was very quick. I have used others which have been fine, hopefully this won't happen again.
Response of the brand
I'm sorry to read that the inner-tube has split. This is an uncommon occurrence and is hard to explain exactly what lead to this.
If you feel the item was faulty, please return it to us for an exchange with your receipt.
Regards,
Peter Lazarus, National Cycling Manager, DECATHLON
Inner Tube were not inflating
Neeraj (India) Used for 1 week or less Verified purchase What is a "Verified purchase"?

Where review is marked as "Verified purchase" confirmed by Decathlon, this means that we could verify that the client who filed this opinion has purchased the product from us.

We can confirm purchases for the reviews expressed on a request by e-mail after purchase or when the customer has this review from his personal space.

If a review is not marked as "Verified purchase," this does not mean that the author's review has no experience with the product. They may have given their review directly on the site without unique identification, or the product has been offered or paid by someone else.

The label "Verified purchase" let's help you judge the reliability of a review.
Bought 26" Tubes with some other products had tried it my own cycle but found them of bad quality as new tubes were not retaining air at all have to buy more of other brand.
Response of the brand
Hello Neeraj, 

Thank you for taking the time to give us your feedback. It will be really helpful if you can give us the date of manufacture/batch number for us to trace back and check the quality. However, usually, the innertubes have had good ratings. Sometimes its is possible that the valve is defective. If it is a manufacturing defect then the tubes can be exchanged for a new one. It is also possible that there is a very tiny piercing through which the air leaks. It happens commonly when the bike is ridden on city tarmac conditions. 

Deepak BABU DECATHLON
  • 1