WADERS REPAIR INSTRUCTIONS
1. Turn your product inside out (repairs are made on the inside)
2. Position your product so as to reduce the tear or hole as much as possible
2. Cut the patch in a circle to size (1 cm larger than the hole).
4. Position the component over the hole (pay attention to the direction)
5. Place a piece of greaseproof paper over the components to protect them
6. Iron with a hot iron (level 3) for 45 seconds, paying particular attention to the edges
7. Leave to rest for 24 hours before use
INSTRUCTIONS FOR REPAIRING WATERPROOF CLOTHING
1. Turn your product inside out (repairs are made on the inside)
2. Position your product so as to reduce the tear or hole as much as possible
2. Cut the patch in a circle to size (1 cm larger than the hole).
4. Position the component over the hole (pay attention to the direction)
5. Place a piece of greaseproof paper over the components to protect them
6. Iron with a hot iron (level 3) for 20 seconds, paying particular attention to the edges
7. Leave to rest for 24 hours before use
COMPOSITION
The set includes: 2 8 x 8 cm squares + 1 12 x 12 cm square.
100% TPU
Tips for storage and maintenance
Hand wash
Do not bleach
Do not tumble dry
Do not dry-clean
Storage tips
Store in a sheltered, room-temperature place. Otherwise, the component piece may stick together
Restrictions on use
Not for use on neoprene and PVC waders.
