Photos
Loading

4x32 SCOPE SIGHT WITH MOUNT

€ 46.00

Designed for Long range shooting with a .22 Long Rifle.

More details
SKU: SX8040418 / 314258 / 8040418
Select a color:

Size Guide
List of stores
Check availability
Reserve

Order online
Delivery in 5 to 6 days
Product benefits Designed for Long range shooting with a .22 Long Rifle.
  1. Magnification
    A fixed zoom of 4X
  2. Diameter
    The main tube is 25.4mm in diameter, that of the lens is 32mm.
  3. Weight
    350 g
  4. Easy assembly / dismantling
    Supplied with clamps for 11 mm rail
Product feature
  1. SIGHT STRUCTURE TECHNICAL DATA:
    Magnification: Fixed 4 zoom Diopter adjustment at the eyepiece. Lens diameter: 32 mm Tube diameter: 25.4 mm Length: 295 mm Weight: 350 g Reticle type: Cross no. 8 "Duplex" type
  2. SIGHT MECHANICAL DATA
    The turrets are graduated in ¼ of MoA which corresponds to: 7 mm at 100 meters or 0.7 mm at 10 meters per click The adjustment is made by unscrewing the protective caps and tool-free adjustment Supplied with an Allen key to mount the clamps
  3. ASSEMBLY ADVICE
    - The scope is sold with its Allen key; use it to unscrew the two lower screws of the mounts. - Slide the scope on the 11 mm rail of your weapon, hold it and very lightly tighten the two screws. - Position yourself behind the weapon, if you see perfectly in the scope it is correctly positioned. - If this is not the case, slide the scope in the rail in order to obtain the correct distance between your eye and the eyepiece (8 to 10 cm from your eye).
  4. ADJUSTING THE SCOPE TO YOUR VISION
    - Aim at a white wall and observe the cross-hairs on your scope sight. They should appear sharply defined. If not, hold the eyepiece (the part closest to your eyes) and turn it carefully. This adjustment focuses the cross-hairs in accordance with your vision. - Once you have found the position where the cross-hairs appear well-defined, tighten the locknut situated between the zoom ring and eyepiece to prevent the eyepiece from being moved unintentionally.
  5. HOW TO ADJUST YOUR SCOPE TO SHIFT THE POINT OF IMPACT
    - Unscrew the protective caps on the turrets. - The upper turret adjusts the height (vertical axis) of your point of impact, and is marked UP to indicate the direction for raising your point of impact. - The turret situated on the right-hand side of your scope sight adjusts in the horizontal axis, and is marked R (Right) to shift your point of impact further to the right. - Refer to the table in the photos to find out the value of a click depending on the distance of your target.
Product testing
  1. Product information
    A ready-to-use scope fitted with its 11 mm mount for quick and easy installation. With a magnification of 4X, it will allow you to increase your accuracy on target
  2. Lab tested
    A few words from the product manager: This scope makes it easy to practice recreational rifle shooting. Beware, however, of use on large calibre rifles which may prove to be too brutal for this scope.