500 Horse Riding Helmet - Black

€ 37.00
SKU: S168277 (2349486)
Select a color:
    Select a size :
Size Guide

Out of stock

Product benefits
  1. Impact protection
    VG1 01.040.2014 certified helmet in accordance with Directive 89/686/EEC.
Product feature
  1. Sizes:
    S (51-54 cm), M (55-58 cm).
  2. Ventilation:
    The ventilation holes are relatively large to provide excellent ventilation!
  3. Flexible brim:
    The flexible brim of our 500 riding helmet is compliant with the requirements of European standards.
  4. Adjustment
    For optimal protection, the helmet should fit snugly without being too tight. When the harness and wheel are properly adjusted, the helmet should not slide forward, back, or from side to side, even when you are moving!
  5. Harness adjustment
    For optimal support, the harness must go under the throat, like a chinstrap, not over the chin.
  6. Shock absorption:
    This helmet has been designed to completely or partially absorb impacts to the rider's head in the event of a fall or violent impact. When an impact occurs, the helmet and/or the padding can deform or break to absorb the energy of the impact. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
  7. Standards:
    VG1 01.040.2014 in accordance with Directive 89/686/EEC Harmonised European standard EN1384: 2012 withdrawn in October 2014. Until a new version is issued, in order for them to be sold in Europe, all helmets produced after 4 November 2014 must undergo testing and be CE marked. This marking must be followed either by Directive 89/686/EEC; either by document VG1 01.040 2014-12; either by standard prEN1384:2016; either by EN1384:2017.
  8. Information on standards:
    EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. When in doubt, please consult the event organisers.
  9. Care advice:
    Wash outer surface with soapy water, rinse, then dry. Foam paddings are machine washable at a maximum of 30°C. Do not tumble dry.
Product testing
  1. Composition
    Main lining : 100.0% Expanded Polystyrene (EPS) Foam : 100.0% Polyester (PES)
  2. Approved by
    UTAC, an independent laboratory appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the l
  3. Storage advice
    Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun, as this can degrade the protective performance of the polystyrene padding.
  4. Product restrictions
  5. Product information
    Looking for a streamlined, elegant riding helmet? The 500 is made for you! It combines safety, comfort and ventilation. And what's more, the inner lining is removable and machine washable!
  6. Lab tested
    Tested in an independent laboratory in compliance with current regulations.