Photos
Loading
Product benefits
-
IsothermalStarting temperature 95°C: 70°C after 6h, 56° after 12h, 40° after 24h.
-
Ease of useLarge opening, screw-on cover, 2 food boxes included. S/steel
-
Easy maintenanceEasy to clean thanks to its large opening. Stainless steel internal wall.
-
Easy transportLarge folding handle on the lid.
-
DurabilityDouble stainless steel int. wall con.18/8 (304) with an air gap between the two.
Product feature
-
Advice for maximising the performance of your isothermal box.Fill your food box with hot water for 5 minutes then replace the water with your hot food (either directly into the container or in the little boxes supplied.). Close the box. The fuller the box, the more effectively it keeps its contents hot or cold.
-
Functions2 food boxes included (0.35L and 0.65L) allowing you to separate food. WARNING!! To use in the microwave, it is essential to open the boxes. Do not heat in the closed position. Do not leave food for more than 12 hours in the boxes or in the container.
-
Care tipsWash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open. Only the small food boxes may be washed in the dishwasher.
-
First useRinse the entire product 3 times with clear water before using for the first time.
-
Materials and regulationsAll of our products and materials are compliant with the regulations in force for food contact and do not contain Bisphenol A (BPA).
-
Weight and dimensionsVolume: 2 litres Dimensions: Ø 15 cm x 22 cm Weight: 1160 grams
Product testing
-
CompositionBottle/Body : 100.0% Stainless steel Inside room : 100.0% Polypropylene (PP) Cap : 100.0% Polypropylene (PP) Joint/Gasket : 100.0% Silicon
-
Storage adviceWash and dry before storing. Store in a clean, dry place.
-
Cleaning adviceClassic washing and rinsing. Only the food boxes may go in the dishwasher.
-
Product restrictionsThe casing is not dishwasher or microwave safe.
-
Product informationIn stainless steel, practical with its 2 food compartments included. (2 litres).
-
Lab testedOur isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.
