Photos
Loading

Non-slip adhesive pads for snowboards.

€ 7.00

Designed for prevent feet from sliding on the snowboard when taking ski lifts.

More details
SKU: S136505 (893195)
Select a color:
    Select a size :
Size Guide

Available online

Delivery in 4 to 5 days

Product benefits
  1. Traction
    Structure with relief points for maximum boot grip on the pad.
  2. Grip
    Non-slip material so the boot doesn't slip on the pad.
  3. Grip
    3M Scotch tape for a very good bond between the pad and the board.
Details
  • Size
    one size
Product feature
  1. Advice for gluing the pad to the board
    It is important that you take 4 minutes to stick the pad down properly. 1. The board must be thoroughly cleaned before sticking the pad, using a damp sponge with soap or detergent to remove the grease. 2. Rinse thoroughly to remove any soap. 3. Dry with a cloth 4. Stick the pads where you want them, near the rear binding.
  2. Where should I position the pad
    Place the 4 pads where you place your foot when you use a ski lift. Try simulating taking a ski lift before sticking the pad, to see where your rear foot will be. Caution! Do not glue the pads within 4 cm of the screw inserts, otherwise you will no longer benefit from the maximum setting of the bindings.
Product testing
  1. Composition
    Protection cover : 100.0% Polyvinyl chloride (PVC)
  2. Product catchline
    These non-slip adhesive pads stick quickly and will not move thanks to their 3M glue. Good foothold without slipping on the board thanks to the relief points on the pad.
Product reviews
/ 5
0 review
1 user recommend this product
Write a review
  • Buono

    11/02/2018
    Francesco (Italy)
    Used for
    Avevo paura che si scollassero, mai successo
  • Buono ma costoso

    14/01/2018
    Andrea (Italy)
    Used for 2 to 8 weeks
    Il prezzo è troppo alto