Photos
Loading

Men’s 7.5 mm neoprene diving wetsuit for cold water SCD 100

€ 125.00
SKU: S123150 / 2014976 / 8354122
Select a color:
    Select a size :
Size Guide
List of stores
Check availability
Reserve

Order online
Delivery in 4 to 5 days
Product benefits
  1. Thermal insulation
    7 mm full neoprene wetsuit. Waterproof seams (GBS), with smooth sleeve cuffs.
  2. Easy dressing
    100% stretch neoprene with front zip. Hood.
  3. Freedom of movement
    Stretch neoprene, pre-shaped anatomical cut without stitching under the arms.
  4. Durability
    Protective reinforcements at the knees to reduce wear.
Product feature
  1. Details on thermal insulation
    One-piece full wetsuit, made of 100% stretch 7.5 mm panels (with production tolerance). 7 mm neoprene foam, covered with nylon fabric on both sides. Neoprene distribution: 100% stretch neoprene, smooth edges on the cuffs and ankles for improved watertightness. Once a thin layer of water (that enters through the zip) gets trapped between your body and the wetsuit, the circulation of the water is limited.
  2. GBS (glued and blind stitched) assembly
    The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
  3. Ease of movement / Putting on and taking off the wetsuit
    One-piece with an attached hood equipped with the Air Expulse system: a system to evacuate air bubbles trapped in the hood. Easy to put on with the diagonal zip on the front of the wetsuit. No underarm seams for easier arm movements. Pre-shaped cut on the arms and legs, with back arch for easier movements.
  4. Reinforcements to reduce wear
    The wetsuit has printed reinforcements on the knees to reduce wear
  5. Thermal performance class
    This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) to check it complies with the current standard (EN 14225-1:2017). CLASS B certified wetsuit: A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F).
  6. Adjust the thickness, adjust your warmth!
    When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different wetsuits for different diving conditions, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm undersuit or a 5.5 mm oversuit.
  7. What is a diving wetsuit?
    This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7.5 mm. Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.
  8. Tips on how to get into a wetsuit
    Put your foot in a plastic bag, then slip your leg into your wetsuit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
  9. Tips on how to take care of your wetsuit
    1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with an antibacterial solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well ventilated place. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease
Product testing
  1. Composition
    Foam : 100.0% Rubber - Chloropren (CR) - Neopren Lining : 100.0% Polyamide
  2. Approved by
    Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye - France. The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development
  3. Storage advice
    Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
  4. Product restrictions
    Swimming and wave sports.
  5. Product information
    A 7mm neoprene diving wetsuit with very high thermal protection. This keeps you warm when diving in cold waters.
  6. Lab tested
    Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.