Error:Operation timed out after 0 milliseconds with 0 out of 0 bytes received Men’s SCD 100 7.5 mm SCUBA diving wetsuit for cold water
Photos
Loading

Men’s SCD 100 7.5 mm SCUBA diving wetsuit for cold water

€ 120.00

Designed for regular SCUBA divers in waters between 10 °C and 18 °C.

More details
SKU: S123150 (2014976)
Select a color:
    Select a size :
Size Guide

Available online

Delivery in 4 to 5 days

Product benefits
  1. Thermal insulation
    7,5 mm full wetsuit. Taped seams with a GBS glued and blind stitched assembly
  2. Freedom of movement
    Stretch neoprene, pre-shaped anatomical cut without stitching under the arms.
  3. Waterproof
    Rolled, smooth edged cuffs and ankles for maximum watertightness.
  4. Easy dressing
    100% stretch neoprene with front zip fastener.Hood.
  5. Abrasion resistance
    Ergonomic knee reinforcements.
Details
Product feature
  1. Details on thermal insulation
    Wet-type full one-piece wetsuit, made of 100% stretch 7.5 mm panels (with production tolerance).7 mm neoprene foam, covered with nylon fabric on both sides. Neoprene distribution:100% stretch neoprene, smooth edges on the cuffs and ankles for improved watertightness. Once a thin layer of water (that enters through the zip) gets trapped between your body and the wetsuit, the circulation of the water is limited.
  2. GBS (glued and blind stitched) assembly
    The seams of the wetsuit and hood are waterproof, stitched in GBS (Glued and Blind Stitching):the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
  3. Ease of movement / Putting on and taking off the wetsuit
    One-piece with an attached hood equipped with the Air Expulse system:a system to evacuate air bubbles trapped in the hood. Easy to put on with the diagonal zip on the front of the wetsuit. No underarm seams for easier arm movements.Pre-shaped cut on the arms and legs, with back arch for easier movements.
  4. Resistance to rubbing
    The wetsuit is equipped with reinforcements on the knees to increase resistance.
  5. Weight of the wetsuit (size L)
    Weight: 2.96 kg (with production tolerance).
  6. Thermal performance class
    This SCUBA diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille-France) in order to validate its compliance with the current standard (EN 14225-1: 2005). CLASS B certified wetsuit: A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F).
  7. Adjust the thickness, adjust your warmth!
    When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
  8. What is a wet diving wetsuit?
    This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7.5 mm. Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.
  9. Tips on how to get into a wetsuit
    Put your foot in a plastic bag, then slip your leg into your wetsuit.You entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
  10. Tips on how to take care of your wetsuit
    1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well ventilated place. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.
  11. What is the SUBEA brand?
    Tribord Diving is now called SUBEA, the Decathlon brand dedicated to underwater sports (snorkelling, SCUBA diving, spearfishing and free-diving).The markings on all our diving products will gradually be replaced. Why SUBEA? Because: "SUBaquatic Experiences are Amazing"! For more information:www.subea.com
Product testing
  1. Composition
    Foam : 100.0% Rubber - Chloropren (CR) - Neopren Lining : 100.0% Polyamide
  2. Approved by
    Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye - France.The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development o
  3. Storage advice
    Dry your wetsuit out of the sun and well clear of all sources of heat.Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
  4. Product restrictions
    Swimming and wave sports.
  5. Product catchline
    A 7.5 mm wetsuit with high thermal protection that keeps you nice and warm when diving in cold waters.
  6. Lab tested
    Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Product reviews
4.64 / 5
25 reviews
0 user recommend this product
Write a review
No product review