Recommendations for application
Obtain the tree owner's consent before applying any pine tar.
Choose a tree of little value, 20 cm minimum in diameter, cut off the lower branches up to a height of about 1 metre. Make a few horizontal 1 - 2 cm cuts in order to impregnate the bark. Paint the tar on with a brush, starting at the top and letting the product run down the trunk.
Recommendations for summer/winter application
The pine tar in the bucket has a paste-like viscosity which is easy to spread in summer temperatures.
In winter the tar may set and we would recommend that the night before use you keep the bucket at a temperature of 20°C, or place the bucket in a basin of hot water one hour before application.
Recommandations
-Do not expose the product to a source of heat.
-Keep out of reach of children.
-Keep away from food and drink.
-Do not eat, drink or smoke while using this product.
-Keep bucket upright and tightly closed in a dry, well-ventilated frost-free place.
-Close tightly after use.
-Avoid contact with skin and eyes.
-Wear gloves when using the product.
-Do not re-use the packaging.
-Thoroughly empty after final use.
Tips for storage and maintenance
Storage tips
Store in a well ventilated place away from excessive heat.
