Package contents
Package contents:
- The scope
- 2 transparent protective caps (flip cap)
- A microfibre cloth
- 1 Allen key.
Technical data of sight structure:
Magnification range: Variable zoom from 4 to 16.
Diopter adjustment on the eyepiece.
Lens diameter: 50 mm
tube diameter: 25.4 mm
Length: 355 mm
Weight: 650 g
Reticle type: MIL DOT
Transmission rate: 83% at 550 nm
Eye distance: 113-82 mm (depending on zoom)
fields of view: [7.2 ; 2] metres to 100 m
Parallax adjustable from 15 metres to infinity.
Anti-fogging: Purged with nitrogen
Withstands all weather conditions.
Sight mechanical data
The turrets are graduated in 0.1 MIL which corresponds to:
- 1 cm at 100 m per click
- 1 mm to 10 m per click
To make a click, you must first unlock the turret by pulling it outwards and then turning the turret.
Each turret turn corresponds to 6 MIL or 60 cm at 100 m
Elevation range: 11.5 MIL
All easily adjustable with a tool-free grip
Assembly advice:
- This scope comes without the assembly collars. You will have to buy 25.4 mm diameter collars.
- Slide the scope on the 11 mm rail of your weapon, hold it and very lightly tighten the two screws.
- Position yourself behind the gun; if you can see perfectly in the sight, it is correctly positioned.
- If this is not the case, slide the scope in the rail in order to obtain the correct distance between your eye and the eyepiece (8 to 10 cm from your eye).
Adjusting the scope sight to your vision
- Aim at a white wall and observe the crosshairs on your sight. They must appear sharply defined. If not, hold the eyepiece (the part closest to your eyes) and turn it carefully. This adjustment focuses the crosshairs in accordance with your vision.
- Once you have found the position where the crosshairs appear well-defined, tighten the locknut situated between the zoom ring and eyepiece to prevent the eyepiece from being moved unintentionally.
How to adjust your scope sight to shift the point of impact
- Unlock the turrets by pulling on them.
- The upper turret adjusts the elevation (vertical axis) of your point of impact, and is marked UP to indicate the direction for raising your point of impact.
- The turret on the right-hand side of your sight enables adjustments in the horizontal axis. It is marked R (Right) to shift your point of impact further to the right.
- Refer to the table in the photos to find out the value of a click depending on the distance of your target.
